Connection Setting On Hdcu1000/1080/1500/3300 And Ccu-590/790; Network Setting Menu; Ip Address Setting Menu - Sony BVP-E30 Manual

3-4. Connection Setting on HDCU1000/1080/1500/3300 and CCU-590/790

Implement the NETWORK setting of the CCU-MENU.
For details of the menu operation block and menu operation method, refer to the Operation Manual.
m
. When implementing the network setting, it can be effi ciently set by using the CCU Menu Control menu of the RCP that is
directly connected to the CCU/HDCU with the CCA cable.
. Set NS MODE of the CCU/HDCU to LEGACY, and connect the MSU directly to the CCU/HDCU with the CCA cable.
The network setting using the CCU Menu Control menu of the MSU becomes possible. Set the IP address fi rst. Set next
the NS MODE to MCS/BRIDGE and connect to network. The network setting can be implemented more effi ciently than
the setting from CCU/HDCU.

3-4-1. NETWORK Setting Menu

Menu display method
1. Operate the menu operation switch of the internal board to display CCU-MENU.
(For the internal board, refer to the Operation Manual of the respective models.)
2. Select NETWORK SETTING, and set the CANCEL/ENTER switch to the ENTER position.
(SYSTEM OPERATION and CCU CONFIGURATION are displayed in the HDCU1000 series only.)
* * C C U - M E N U
S Y S T E M O P E R A T I O N
C C U C O N F I G U R A T I O N
N E T W O R K S E T T I N G

3-4-2. IP Address Setting Menu

< I P A D D R S E T >
H O S T I P A D D R E S S
1 9 2 . 1 6 8 .
S U B N E T M A S K
2 5 5 . 2 5 5 .
D E F A U L T G A T E W A Y
1 9 2 . 1 6 8 .
3-8 (E)
* *
N 0 0 T O P
0 . 1 0 1
2 5 5 . 0
0 . 2 5 4
S E T
Item Function
HOST Set the assigned IP address (0 to 255)
IP ADDRESS
SUB NET Set the subnet mask value of the network
MASK environment in use (0 to 255)
DEFAULT Set the default gateway of the network environ-
GATEWAY ment in use (0 to 255)
SET The above setting is saved
Camera Network System