Connection Settings Of Equipment; Settings Of Camera Network System - Sony BVP-E30 Manual

3-1. Settings of Camera Network System

Legacy
Mode Select Legacy
_
Connection Mode
_
Target IP Address
_
Master/Client
_
Master IP Address
_
Equipment number *3
*1 : MSU alone can be set as Master.
*2 : CCU/HDCU has the network control ON/OFF switch on board. It should be set to ON when using the network control. For details of
the connection selection switch, refer to Section "3-4-6. Equipment Setting".
*3 : The equipment numbers when they are set correspond to the camera selection numbers (before assignment) of MSU.
*4 : For the method of setting the equipment numbers, refer to Section "3-2-2. Camera Network System Setting Menu", Section "3-3-5.
RCP No. Setting Menu" and Section "3-4-6. Equipment Setting" of this manual.
LAN and TCP/IP should be set in accordance with the network to be connected.
Upon completion of the network setting, reboot the system.
Camera Network System
Section 3

Connection Settings of Equipment

Bridge Mode
Active Passive
*2 Bridge Bridge
Semi-Auto Semi-Auto
(Active) (Passive)
_
IP address of
connection target
_ _
_ _
_ _
MCS Mode
Master *1 Client
MCS MCS
_ _
_ _
Master Client
_
IP address of
Master
Set the unique number that does not
duplicate between multiple units of
MSU, RCP and CCU/HDCU each
*4
other
3-1 (E)