Philips XL3402 User Manual page 20

6.3.6 Select pause duration
This option is helpful when using operator
services. The default value of pause duration that
is preset in your XL340 should be the best suited
for your country network and therefore you
should not need to change it.
In standby mode:
Press and hold
1
Enter the pause duration index number (see
2
below).
Press and hold
3
setting is displayed.
Pause duration
PAUSE 1
PAUSE 2
6.3.7 Select dial mode (country
dependent)
The default value of dial mode that is preset in
your XL340 should be the best suited for your
country network and therefore you should not
need to change it.
In standby mode:
Press and hold
1
Enter 60.
2
Press and hold
3
• The new setting is shown.
6.3.8 Temporary tone dialing in pulse dial
mode
If the dialing mode is set to pulse, you can press
and hold to set temporary tone dialing.
• d will be displayed on the screen. All the
following digits will be dialed as tones until you
hang up.
6.3.9 Set prefix insertion
The prefix insertion feature checks and formats
your outgoing call number before it is dialed. If
the first few digits of the number match with the
18
until you see MENU?.
until you see the new
Index Number
78
79
until you see MENU?.
to confirm.
digits you set as DETECT, they will be replaced
by the digits you set as PREFIX.
For example, you set DETECT as 604 and
PREFIX as 967. When you are making a call to
6045551212, the actually dialed number will be
9675551212. The number shown is still
6045551212.
In standby mode:
Press and hold
1
Enter 62. Press and hold
2
Edit the DETECT digits
3
OR
enter a new one if you see DETECT? (such
3
as 604 in the above example).
Press and hold
4
Edit the PREFIX digits
5
OR
enter a new one if you see PREFIX? (such as
5
967 in the above example).
Press and hold
6
Note
If the dialed number starts with #, * or P, the
PREFIX will not be added.
Note
Press and hold
6.3.10Message waiting indication
If you have subscribed to the voice mail service
from your local service provider,
when you have a new message in your mailbox.
The LED on base station will blink.
After you've listened to all the new messages,
will turn off. The LED on base station will
stop blinking.
Note
You may also see VOICEMAIL shown on the
display if you have new message in your mailbox,
but it will disappear after you make an outgoing
call.
until you see MENU?.
.
to confirm.
to confirm.
to insert a pause in PREFIX.
will be on
Use more of your phone