Philips XL3402 User Manual page 19

Enter 51. Press and hold
2
BASE?.
Select the base using the digit keys (1, 2, 3 or
3
4). Press and hold
SEARCHING...
Press and hold
4
seconds.
• The base will turn on the LED for 30 seconds.
• If registration is successful, handset will show
REGISTERED.
Note
If registration was not successful, the handset will
show FAILED. Repeat the above procedures
and try again.
6.3.2 Select a base
If your handset is registered to more than 1 base,
you can select which base the handset will use.
You can choose a fixed base or you can allow the
handset to automatically search for a nearby
available base (AUTO base selection).
In standby mode:
Press and hold
1
Enter the base index number (see below).
2
Press and hold
3
• If successful, handset will show the selected
base. Otherwise, handset will show FAILED.
Base selection
BASE 1
BASE 2
BASE 3
BASE 4
AUTO
6.3.3 Un-register a handset
A handset can un-register another handset
registered to the same base station. It cannot un-
register itself.
In standby mode:
Press and hold
1
Enter 52. Press and hold
2
HANDSET?.
Use more of your phone
until you see
until you see
on the base unit for 3
until you see MENU?.
to confirm.
Index Number
64
65
66
67
68
until you see MENU?.
until you see
Enter the number of the handset you want to
3
unregister. Press and hold
• If un-registration is successful, your handset will
show DELETED.
6.3.4 Reset your phone
You can reset your phone to factory settings. To
find out what settings are being reset, see
page 20.
In standby mode:
Press and hold
1
Enter 01 if you want to delete all the
2
memories during the reset.
OR
Enter 02 if you want to keep the memories
2
unchanged during the reset.
Press and hold
3
PROCESSING....
6.3.5 Select flash duration
This option is helpful when using operator
services. The default value of flash duration that is
preset in your XL340 should be the best suited
for your country network and therefore you
should not need to change it.
In standby mode:
Press and hold
1
Enter the flash duration index number (see
2
below).
Press and hold
3
setting is displayed.
Flash duration
FLASH 1
FLASH 2
FLASH 3
FLASH 4
FLASH 5
FLASH 6
FLASH 7
to confirm.
until you see MENU?.
until you see
until you see MENU?.
until you see the new
Index Number
71
72
73
74
75
76
77
17