Table of Contents
Advertisement
Registration
Code
Registering the
Handset to the
DECT System
Selecting the
DECT System
30
17 Menu: System
The handset can be operated with a maximum of 5 DECT sys-
tems. Before you can make a call via the DECT system, the
handset has to be registered to the respective system. A sys-
tem ID and registration code may be necessary for the registra-
tion process. Ask the respective system administrator for the
valid registration code. When the handset is not yet subscribed
to the system the display is showing "Please, subscribe".
All settings in this chapter are started by pressing the softkeys:
Menu
System
Then select...
Subscription
Subscribe
-
or
Use Park-Code
-
or
Cancel
-
The following entries must be made when logging on:
PABX-PIN
Use Park-Code
Enter name
Internal No.:
Subscription
OK
If the handset has been registered to several DECT systems,
then you can select which one the handset is to use. Select the
system via the arrow keys before confirming "Select". By
Options
choosing
disabled. The selected system is shown in the idle display.
OK
OK
>Subscribe HS<
OK
F
PARK
OK
: this code is used to get access to the
DECT System.
: a system ID should only be entered if
you are at a location where two DECT
systems overlap.
: give the name of the DECT system to
which you are registering. This will be
shown on the idle display. For informa-
tion concerning the entry of characters,
refer to "Entering Characters / Names".
: the phone number, assigned to your
DECT handset can be entered here (ask
your system administrator for the phone
number).
OK
select a System
Select
, the function automatic search is
F
OK
PABX-PIN
OK
Options
Select
OK
Advertisement
Table of Contents
