Set Auto Prefix; Country Selection; Activate/Deactivate Conference Mode - Philips SE 745 Owner's Manual

will return to its default settings. However, your
phonebook as well as the unread messages of
your answering machine will remain unchanged
after reset.
Note
You may have to configure your phone once again.
In this case the WELCOME mode will appear again
after master reset. (go to chapter 3.3)
m
1
Press MENU in idle mode, scroll
and press
Advanced Set
:
to and press
Reset
:
2
Scroll to
Yes
A validation tone is emitted.
• The unit is reset to its default settings (see
"Default settings" on page 34).

8.11 Set Auto Prefix

This feature allows you to define a prefix number to
be added to the beginning of a number during
predialling (see "Predialling" on page 16). You can
also use this feature to add a detect string to match
and replace the first few digits of the number during
predialling.
You can enter up to a maximum of 5 digits for the
detect string and 10 digits for the auto prefix number.
Note
The use of your SE745 cannot be guaranteed with
all types of PABX.
m
1
Press MENU in idle mode, scroll
and press
Advanced Set
:
to
Auto Prefix
2
is displayed on the screen. Press
Detect digit
m
SELECT to enter.
• The last stored detect string is displayed (if
any).
3
Enter a detect string number (maximum 5
digits) and press
•
Prefix number
m
4
Press SELECT to enter.
• The last stored prefix number is displayed (if
any).
5
Enter the prefix number (maximum 10 digits)
m
and press OK to confirm.
• A validation tone is emitted and the screen
returns to previous menu.
Advanced settings
m
SELECT, scroll
m
SELECT.
m
and press SELECT.
m
SELECT, scroll
m
and press SELECT.
m
OK to confirm.
is displayed on the screen.
Note
If no detect string (blank) is entered, the prefix
number will be automatically added to the predial
number after
For numbers starting with *, # or a pause (P), the
prefix number will not be added to the predial
number after
:
to

8.12 Country Selection

The availability of this menu is dependent on your
country.
You can select another country different from
the one chosen during WELCOME mode.
Note
Once the country is selected, the default line
settings for the selected country will be applied to
the phone automatically (e.g. Recall time, Dial
mode, Language, etc).
1
Press
Advanced Set
:
to
2
Scroll
press
3
Press
• A validation tone is emitted and the screen
returns to previous menu.
:
8.13 Activate/Deactivate Conference
to
mode
When conference mode is activated, you can
initiate a three-party conference call with a
second handset registered to your base station
automatically if the second handset takes the line
when there is already an external call in progress.
The default setting for this mode is
1
Press
Advanced Set
:
to
2
Scroll
m
SELECT to confirm.
• A validation tone is emitted and the screen
returns to previous menu.
r
key is pressed.
r
key is pressed.
m
MENU in idle mode, scroll
m
and press
and press
Country
:
to the country of your choice and
m
SELECT.
m
SELECT again to confirm.
m
MENU in idle mode, scroll
m
and press
and press
Conference
:
to or and press
On Off
:
to
SELECT, scroll
m
SELECT.
.
Off
:
to
SELECT, scroll
m
SELECT.
33