Advertisement
Important Notes:
In order to safely remove the stand attached when this product is received from the factory, lay the unit
face down on a soft cushioned surface such as a quilt or blanket with the stand extending over the
edge of the supporting surface.
The illustration is for reference to the location of the mounting screws, the rear panel of the Display
does not need to be removed.
The Display may have a removable cover(s) for the jack pack, this can be removed without tools
Removal Steps
1. Remove the 5 screws noted in the illustration
2. Pull the pedestal stand away from the set
a. It may be necessary to tilt the bottom of the stand up slightly to clear the plastic positioning tabs.
LCD/LCDVD Display Stand Removal Instructions
Please follow the step below to remove the pedestal stand.
-LSR7 -
Advertisement
