WAGNER W 560 Operating Instruction page 29

W 560
c) Avoid accidental starting-up. Ensure that the switch is in the "OFF" position
before inserting the plug into the socket. Accidents can occur if you carry the power
tool while your finger is on the switch or if you connect the power tool to the power supply
which it is on.
d) Remove setting tools or wrenches before switching on the power tool.
wrench that is in a rotating tool part can lead to injuries.
e) Do not overestimate your abilities. Ensure that you are standing securely and
have your balance at all times. This ensures that you can control the tool better in
unexpected situations.
f) Wear suitable clothing. Do not wear wide clothing or jewelry. Keep yourhair,
clothes and gloves away from moving parts. Loose clothing, jewelry or long hair can
be caught in moving parts.
g) This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.Children should be
supervised to ensure that they do not play with the appliance.
4. Careful Handling and Use of Power Tools
a) Do not overload the tool. Use the power tool designed for the work that you are
doing. You work better and safer in the specified performance range if you use the suitable
power tool.
b) Do not use power tools whose switch is defective.
switched on or off is dangerous and has to be repaired.
c) Remove the plug from the socket before carrying out tool settings, changing
accessories or putting the tool away. This precautionary measure prevents
unintentional starting of the tool.
d) Store unused power tools so that they are inaccessible to children. Donot let
persons use the tool who are not familiar with it or who have not read these
instructions. Power tools are dangerous when they are used by inexperienced persons.
e) Take proper care of your tools. Check whether the moving parts functiontrouble-
free and do not jam, whether parts are broken or damaged so that the tool
function is impaired. Have damaged parts repaired before using the tool. Many
accidents have their origin in power tools that have been maintained badly.
f) Use the power tool, accessories, insert tools, etc. in accordance with these
instructions and in a fashion specified for this special tool type. Take the working
conditions and the activity to be carried out into consideration. The use of power
tools for purposes other than the intended ones can lead to dangerous situations.
5. Service
a) Have your tool repaired only by qualified specialist personnel and only with
original spare parts. This ensures that the tool safety is maintained.
A power tool that cannot be
GB
A tool or
23