84
TPM1.0U LA
1.
Scan Model Number group:
Store Model No. string to the address 7C0
seen "Set Type" in CSM mode. You can press "1 2 3 6 5 4" to check it.
The "Model No. check format" (default SS/MXSSSX//SS) is like the check-format of EDID program.
2.
Scan Serial Number group:
Store Serial No. string to the address (default 7D0) in EEPROM (hex number, total 16 bytes). This information can be seen "Production
Code" in CSM mode. You can press "1 2 3 6 5 4" to check it.
The "barcode check form" (default /B/ZXXYYWWSSSSSS) is like the check-format of EDID program.
You can press
If everything done, press
8. Alignments
(test OK 2006-11-24)
button to check the symbol of characters:
button in "Config dialog" to confirm and exit config dialog.
in EEPROM (hex number, total 16 bytes). This information can be