Cd Operation; Playing A Disc; Selecting A Different Track; Finding A Passage Within A Track - Magnavox MME-100 User Manual

CD Operations
IMPORTANT:
The lens of the CD player should never be
touched.

Playing a disc

This CD player plays Audio Discs including CD-
Recordables and CD-Rewritables.
¶ CD-ROM, CD-I, CDV, VCD, DVD or computer
CDs, however, are not possible.
1
Select CD source.
2
Press OPEN / CLOSE on
the top of the system to open
the CD compartment.
OPEN is displayed when
you open the CD
compartment.
3
Insert a disc with the printed side facing up and
press down on OPEN / CLOSE to close the
CD door.
READ is displayed as the CD player scans the
contents of a disc, and then the total number of
tracks are shown.
Press 2; to start playback.
4
Current track number is displayed then
elapsed playing time of the track are displayed
during disc playback.
14
To interrupt playback press 2;. Press 2; again to
5
resume play.
The display freezes and the current track
number flashes when playback is interrupted.
To stop disc playback, press 9.
6
Note: CD play will also stop when;
– the CD door is opened.
– the disc has reached the end.
– you select another source: TAPE, TUNER.
– you select to standby.
– you press the tape deck PLAY 2 key.

Selecting a different track

Press ¡1 or 2™ once or repeatedly until the
desired track number appears in the display.
If you have selected a track number shortly after
loading a disc or in the PAUSE position, you will
need to press 2; to start playback.

Finding a passage within a track

Press and hold down on ¡1 or 2™ (on the
1
remote control à or á ).
The disc is played at high speed and low
volume.
2
When you recognize the passage you want,
release ¡1 or 2™ (on the remote control à
or á).
Normal playback continues.
Note:
– During a disc program or if SHUFFLE/ REPEAT
active, searching is only possible within the same
track.