Dust And Pollen Filter - Honda Element 2004 Owner's Manual

Main Menu
Lights, Seat Belts, Dust and Pollen Filter
5. Reinstall the socket into the light
assembly by turning it clockwise
until it locks.
6. Test the lights to make sure the
new bulb is working.
7. When reinstalling the taillight
assembly, first place the two pins
in the holes in place. Tighten the
two mounting bolts.
170
Maintenance
Table of Contents
WWW.MANUALS.WS
Seat Belts
LOOP
If your seat belts get dirty, use a soft
brush with a mixture of mild soap
and warm water to clean them. Do
not use bleach, dye, or cleaning
solvents. Let the belts air-dry before
you use the vehicle.
WWW.MANUALS.WS
Dirt build-up in the loops of the seat
belt anchors can cause the belts to
retract slowly. Wipe the insides of
the loops with a clean cloth
dampened in mild soap and warm
water or isopropyl alcohol.

Dust and Pollen Filter

This filter removes the dust and
pollen that is brought in from the
outside through the heating and
cooling system/climate control
system.
Have your Honda dealer replace this
filter every 30,000 miles (48,000 km)
under normal conditions. It should
be replaced every 15,000 miles
(24,000 km) if you drive primarily in
urban areas that have high
concentrations of soot in the air, or if
the flow from the climate control
system becomes less than usual.