To Play A Cd; To Change Tracks (Skip); Operating The Optional Cd Changer; To Stop Playing A Cd - Honda Element 2004 Owner's Manual

Main Menu
Playing a CD

To Play a CD

With the ignition in the
ACCESSORY (I) or ON (II) position,
insert a CD into the CD slot. The
drive will pull the CD in the rest of
the way and begin to play it. You
operate the CD player with the same
controls used for the radio. The
number of the track playing is shown
in the display. The system will
continuously play a CD until you
change modes.

To Change Tracks (SKIP)

Each time you press and release
, the player skips forward to
the beginning of the next track.
Press and release to skip
backward to the beginning of the
previous track.
To move rapidly within a track, press
and hold the or
see CUE or REW in the display.
REPEAT To continuously replay
−
100
Comfort and Convenience Features
Table of Contents
WWW.MANUALS.WS
a track, press and release the RPT
button. You will see RPT in the
display. Press the RPT button again
to turn it off.
RANDOM
tracks in random order. To activate
Random Play, press and release the
A. SEL/RDM button. You will see
RDM in the display. This continues
until you press the A. SEL/RDM
button again.

To Stop Playing a CD

Press the eject button (
remove the CD. If you eject the CD,
but do not remove it from the slot,
the system will automatically reload
the CD after 15 seconds and put it in
pause mode. To begin playing, press
the CD button.
Press the AM/FM button to switch
. You will to the radio while a CD is playing.
Press the CD button to play the CD.
WWW.MANUALS.WS
If you turn the system off while a CD
This feature plays the
−
) to
is playing, either with the PWR/VOL
knob or by turning off the ignition,
the CD will stay in the drive. When
you turn the system back on, the CD
will begin playing where it left off.
Operating the Optional CD
Changer
A CD changer is available for your
vehicle. It holds up to six CDs. You
operate the CD changer with the
same controls used for the in-dash
CD player.
Load the desired CDs in the
magazine, and load the magazine in
the changer according to the
instructions that came with the unit.
To select the CD changer, press the
CD button. The CD and track
numbers will be displayed. To select
a different CD, use the preset 5
(DISC − ) or preset 6 (DISC
button. If you select an empty slot in
the magazine, the changer will, after
finding that slot empty, try to load
the CD in the next slot.
＋ )