Step 3: Configuring The Zūmo; Step 4: Acquiring Satellites; Step 5: Using The Zūmo; Finding Your Destination - Garmin zumo 500 Owner's Manual

G S
ETTING TARTED
Step 3: Configuring the zūmo
To turn on your zūmo, press and hold the
Follow the on-screen instructions to configure your zūmo.

Step 4: Acquiring Satellites

Go outdoors to an open area, away from tall buildings and trees. Turn on the zūmo.
Acquiring satellite signals may take 30–60 seconds.
The bars in the upper-left corner indicate GPS satellite strength. When the bars
are green, your zūmo has acquired satellite signals, you can start navigating.
Step 5: Using the zūmo
A Touch to find a destination.
Touch to view the map.
B
C Touch to make a call (when connected
to a mobile phone with Bluetooth
wireless technology).
D Touch to view traffic incidents, when
an FM traffic receiver is connected.
Touch to listen to MP3 files loaded on
E
the SD card or "Garmin" drive.
Touch to adjust the zūmo's settings.
F
G Touch to adjust the brightness of the screen.
6
Power button on the side of the unit.
A
®
B
C D E F
zūmo 500/550 Owner's Manual

Finding Your Destination

The Where to menu provides several different categories for you to use when you
search for locations.
➊
Touch Where
➍
Select a destination.
Touch the arrows to
G
see more places.
zūmo 500/550 Owner's Manual
➋
to. Select a category.
➎
Touch Go.
TIP: Touch and to see more choices.
G S
ETTING TARTED
➌
Select a sub-
category.
➏
Enjoy the route!
7