Table of Contents
Advertisement
1.4 FEATURES
• Designed for cooling only.
• Powerful and quiet cooling.
• Slide-in and slide-out chassis for the simple
installation and service.
1.5 CONTROL LOCATIONS
• VENTILATION
The ventilation lever must be in the CLOSE position
in order to maintain the best cooling conditions.
When a fresh air is necessary in the room, set the
ventilation lever to the OPEN position.
The damper is opened and room air is exhausted.
NOTE: Before using the ventilation feature,
make the lever, as shown. First, pull down
part
to horizontal line with part
• THERMOSTAT
Thermostat will automatically control the
temperature of the room. Select the higher number
for the lower temperature of the room. The
temperature is selected by positioning the knob to
the desired position.
The 5 or 6 position(middle position) is a normal
setting for average conditions.
• OPERATION
OFF
(
0
)
MED FAN
(
)
LOW FAN
(
)
HIGH COOL (
)
MED COOL (
)
LOW COOL (
)
• AUTO SWING
ON (
): Air swing is operated while OPERATION
knob is set to the COOL position.
OFF (
): Stops the operation of air swing.
.
: Turns the air conditioner off.
: Permits the medium fan speed
operation without cooling.
: Permits the low fan speed
operation without cooling.
: Permits cooling with the
high fan speed operation.
: Permits cooling with the
medium fan speed
operation.
: Permits cooling with the low
fan speed operation.
• Side air-intake, side cooled-air discharge.
• Built in adjustable THERMOSTAT.
• Washable one-touch filter.
• Compact size.
CLOSE
Thermostat
5
4
3
2
1
—4—
Part B
Part A
VENT
OPEN
Operation
Auto Swing
6
Med
Off
On
Fan
7
8
Low
9
Fan
Low Cool
Off
High
Cool
Med
Cool
0
Advertisement
Table of Contents
