Software Update - Samsung DVD-P380 Service Manual

Trouble Shooting

4-2 Software Update

4-2-1 Main F/W Upgrade Method
1) Open the disc tray. place the disc on the tray. Close tray. The Firmware upgrade screen appears.
2) Press the 4/3buttons to select total, then press the ENTER button
3) Press the number buttons to select the desired languange.
s If the "Select Menu Languange" doesn't appear, Please contact to "Samsung Service
Center ".If the unit was succesfully update, the unit will turn off and on after closing the
tray automatically.
s Do not press any button and unplug the power code during upgrade.
s The upgrade procedure may change, refer to the web site (www.samsung.com).
4-4
Fig. 4-
Fig. 4-3
Fig. 4-4
Firmware upgrade appears on the display
firmware upgrade start
s In the middle of writing, the tray will
open automatically, after taking out the
disc, please wait for about 2 minutes.
s If the unit was succesfully updated, the
unit will turn off and on after closing the
tray automatically. When the unit turns
on, the screen will display.
Samsung Electronics