Remote Control Transmitter - Hitachi CP-X880 Service Manual

Remote control transmitter

LASER INDICATOR
VIDEO button
STANDBY/ON button
FOCUS buttons
BLANK button
Disk pad
<For mouse control>
Mouse cursor movement
Left mouse click
ASPECT button
Left /Right
Key buttons
ESC button
MENU button
POSITION button
MAGNIFY buttons
WIRELESS button
KEYSTONE button
REMOTE CONTROL port
WARNING • The laser pointer of the remote control transmitter is used in
place of a finger or rod. Never look directly into the laser beam outlet or point
the laser beam at other people. The laser beam can cause vision problems.
CAUTION • Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation exposure.
ATTENTION
• Do not disassemble the remote control.
• Do not drop or otherwise expose the remote control to physical impact.
• Do not get the remote control wet or place it on wet objects. Doing so may result in malfunction.
• Do not place the remote control near the projector's lens, fan, or vents.
• Remove the batteries from the remote control and store them in a safe place if you
won't be using the remote control for an extended period.
• Replace the batteries whenever the remote control starts to malfunction.
• When strong light, such as direct sunlight or light from an extremely close range (such as from an
inverter fluorescent lamp), hits the projector's remote sensor, the remote control may cease to function.
Adjust the direction of the projector to keep light from directly hitting the projector's remote sensor.
CP-X880/CP-X885
LASER
INDICATOR
STANDBY/ON VIDEO RGB
UP
FOCUS ZOOM PAGE
DOWN
BLANK LASER
ASPECT
PUSH
ENTER
ESC MENU RESET
POSITION AUTO PinP
MAGNIFY VOLUME
ON
FREEZE MUTE
OFF
WIRELESS KEYSTONE ONE TOUCH
Precautions to observe when using the remote control
4
RGB button
ZOOM buttons
PAGE buttons
LASER button
Right mouse button
<For mouse control>
Right mouse click
Lever switch (*)
RESET button
AUTO button
PinP button
VOLUME button
MUTE button
FREEZE button
ONE TOUCH button
* Using the lever switch
Flip toward disk pad : Up ( ) key
Flip toward MENU button: Down ( ) key
Press in center : ENTER button
Battery box
2 1
LASER switch
1: Enable
2: Disable