Ac Phone Charger - HTC PG86100 Safety Manual

AC Phone Charger

Use the Correct External Power Source
A product should be operated only from the type of
power source indicated on the electrical ratings label.
If you are not sure of the type of power source required,
consult your authorized service provider or local
power company. For a product that operates from
battery power or other sources, refer to the operating
instructions that are included with the product.
The AC phone charger designed by Sprint for this unit
requires the use of a standard 120 VAC power source
for device operation.
Never attempt to disassemble or repair an AC phone
charger. Never use an AC phone charger if it has
a damaged or worn power cord or plug. Always
contact a Sprint authorized service center, if repair or
replacement is required.
Never alter the AC cord or plug on an AC phone
charger. If the plug will not fit into the available outlet,
have a proper outlet installed by a qualified electrician.
Never allow any liquids or water to spill on an AC
phone charger when it is connected to an AC power
source.
Always use the authorized Sprint AC phone charger
to avoid any risk of bodily injury or damage to your
cellular phone or battery.
Never attempt to connect or disconnect the AC phone
charger with wet hands. Always unplug the AC phone
charger from the power source before attempting
any cleaning. Always use a soft cloth dampened
with water to clean the equipment, after it has been
unplugged.
Handling the cord on this product or cords associated
with accessories sold with this product, will expose
you to lead, a chemical known to the State of
California to cause birth defects or other reproductive
harm. Wash hands after handling.
Always disconnect the travel charger or desktop
charger from the power source when it is not in use.
Important Safety Information Important Safety Information 1 1