Table of Contents
Advertisement
: Lets you choose an ISO level
ISO (photo mode only)
or set it to
. Higher ISO numbers are better for
Auto
taking pictures in low light conditions.
: Lets you select a photo or video
Resolution
resolution to use for capturing.
Widescreen (photo mode only)
ratio between the width and height of your pictures.
When this check box is selected (default), photo
resolutions available for selection are in a 3:2 ratio
and you can use the entire viewfinder screen to
frame your subject. When not selected, photo
resolutions available for selection are in a standard
4:3 ratio.
Quality (photo mode only)
level to use for capturing photos.
Self-timer (photo mode only)
self-portrait or group photo; you can set the self-timer
to either 2 seconds or 10 seconds.
Geo-tag photos (photo mode only)
GPS location in your captured photos.
Encoding type (video mode only)
type of compression to use when capturing video.
: Lets you change the
: Lets you select the quality
: Lets you select take a
: Lets you store the
: Lets you choose the
Recording length (video mode only)
maximum duration or file size for capturing video.
Record with audio (video mode only)
whether to record audio when capturing videos.
: Lets you set how the camera
Metering mode
measures the amount of light to calculate the best
exposure:
mode allows the camera to
Spot metering
measure light around the focus point.
Center area
mode allows the camera to measure
light in the center.
mode allows the camera to measure light
Average
in the whole image.
Review duration
: Lets you specify how long a
captured photo or video is displayed on the review
screen before the camera changes back to the
viewfinder screen.
Flicker adjustment
: Lets you reduce flicker when
taking indoor shots under fluorescent lighting. Keep
this setting on
or manually set it to match the
Auto
frequency (
or
50Hz
60Hz
used for the country you are in.
2H. Camera and Multimedia
: Lets you set the
: Lets you choose
) of the electrical power
119
Advertisement
Table of Contents
