Mode Selections - Sharper Image SI670 Instructions Manual

Mode Selections

Note: In all modes except TV, the channel and viewing opera-
tions are controlled by the viewing source's (VCR, DVD player,
etc.) remote. The receiver/monitor CHANNEL
be programmed to learn and mimic two functions of the source
remote while operating in the Video, VCR3 or VCR4 modes.
2.4G Channel Option - Reception Quality
In cases where there is interference or reduced reception quality,
changing the communication channel between the receiver/
monitor and the tuner/transmitter may help. A change in quality,
caused by other appliances nearby, may vary from room to room
or even area to area.
1. To activate mode selection options, press the MODE SELECT
button.
2. Press the BRIGHTNESS
"2.4G Channel" appears.
3. To change between channel 1, 2 or 3, press the VOLUME
+/- buttons. Both units will simultaneously link to the new
channel.
/ buttons can
or button on the side panel until
A
n
T
1
2
3
4
5
6