Table of Contents
Advertisement
Operation Overview
Overview
Upon power up, the unit defaults to normal viewing mode. The
receiver/monitor must be turned on to make any changes.
1. To access programming and other options, press the MODE
SELECT button on the receiver/monitor.
2. To scroll through the mode selection options, press the LEFT/
RIGHT
or
button:
• Input Source: Identifies the type of signal being sent from
the transmitter/tuner to the receiver/monitor. Options are TV,
Video, VCR3 or VCR4.
• 2.4G Channel: Identifies which of three frequencies is being
used to transmit the sound and picture. Options are 1, 2 or 3.
• Automatic Channel Programming: Identifies the type of
broadcast connection. Options are CATV (Cable TV) or AIR
(Antenna). Includes a feature to automatically scan, identify and
remember signals strong enough to be viewed.
• Manual Channel Programming & Editing: Used to override and
change memory setting for specific channels. Use to add new
channels or delete unwanted channels from the scanned memory.
16
t
e
w
Advertisement
Table of Contents
