Philips HD8847 User Manual page 93

Machine actions
The machine does not turn on.
The machine is in demo mode.
The drip tray gets fi lled al-
though no water is drained.
The red icon is always dis-
played on the machine.
The brew group cannot be
removed.
The brew group cannot be
inserted.
There is a lot of ground coff ee
under the brew group.
Coff ee is not hot enough.
Coff ee is too weak
(see note).
Coff ee does not have enough
crema
(see note).
Causes
The machine is not connected to the
electric network, or the power but-
ton is in the "O" position.
The " " button was pressed and
held for more than 8 seconds.
Water is sometimes drained auto-
matically by the machine into the
drip tray to manage the rinsing of
the circuits and ensure optimum
machine performance.
The coff ee grounds drawer has been
emptied with the machine off .
The coff ee grounds drawer has been
emptied with the machine on with-
out waiting at least 5 seconds before
reinserting it.
The brew group is out of place.
The coff ee grounds drawer is
inserted.
The brew group is not in the off
position.
The gearmotor is not in the correct
position.
Coff ee is not suitable for automatic
machines.
The cups are cold.
The temperature is not correctly set.
This might occur when the machine
is automatically adjusting the dose.
Coff ee is too coarse.
The blend is unsuitable, coff ee is not
freshly roasted or the grind is too
coarse.
ENGLISH
Solutions
Connect the machine to the electric
network and turn the power button to
the "I" position.
Turn the machine off and back on
using the power button.
This is a normal behaviour of the
machine.
The coff ee grounds drawer must al-
ways be emptied with the machine on.
Wait until the icon is displayed
before refi tting the drawer.
Wait until the icon is displayed
before refi tting the drawer.
Turn on the machine. Close the service
door. The brew group automatically
returns to the initial position.
Remove the coff ee grounds drawer
before removing the brew group.
Make sure that the brew group in
the off position, as described in the
"Weekly Cleaning of the Brew Group"
chapter.
Insert the drip tray and the coff ee
grounds drawer. Close the service door.
Turn on the machine without inserting
the brew group. The gearmotor moves
back to the correct position. Turn off
the machine and reinsert the brew
group as described in the "Weekly
Cleaning of the Brew Group" chapter.
It may be necessary to change the type of
coff ee or the coff ee grinder settings.
Preheat the cups with hot water.
Set the temperature as described in the
"Programming" chapter.
Brew a few cups of coff ee as described
in the "Saeco Adapting System" chapter.
Change coff ee blend or adjust grinding
as explained in the "Adjusting the
Ceramic Coff ee Grinder" chapter.
Change coff ee blend or adjust the
grind setting as explained in the
"Adjusting the Ceramic Coff ee Grinder"
chapter.
91 91