Setup - Predator Engines 62879 Owner's Manual

Set Up
Read the ENTIRE IMpORTANT SAFETY INFORMATION section at the beginning of this manual
including all text under subheadings therein before set up or use of this product.
TO pREVENT SERIOUS INJURY:
Operate only with proper spark arrestor installed.
Operation of this equipment may create sparks that can start fires around dry vegetation.
A spark arrestor may be required.
The operator should contact local fire agencies for laws or regulations
relating to fire prevention requirements.
WARNING! DO NOT INSTALL THIS ENGINE ON A VEHICLE. MAY BE USED ON RIDE-ON LAWN MOWERS.
WARNING! INSTALL THIS ENGINE ACCORDING TO EQUIpMENT INSTRUCTIONS BEFORE USE.
Installation
1. Mount Engine, Shaft-side down, to equipment
platform. Secure with Bolts. See Figure A.
2. Run choke and throttle cables (neither
included) through Engine loops. Pass both
through the Group Loop, then the choke
cable through Loop A and the throttle
cable through Loop B. See Figure B.
Page 6 For technical questions, please call 1-888-866-5797.
Bolts
Figure A
Loop A
Loop B
Group Loop
Figure B
ITEM 62879