Playing Tapes; Rewinding/Fast Forwarding; General Information On Recording - Philips FW-C355 User Manual

Playing tapes

To playback a selected tape deck
1
Press TAPE (or TAPE 1/2 on the remote
control) repeatedly to select tape deck 1 or 2.
2
PressÉ Å .
To stop playback
Press Ç.
To select automatic replay or one time
playback
Press AUTO REPLAY repeatedly to select the
different playback modes.
"AUTO REPLAY" (
is displayed.
AUTO REPLAY ...the tape will rewind
automatically at the end of
playback and replay again. It will
replay up to a maximum of 20
times.
ONCE .............. the tape will playback the
selected side once and then stop.
Rewinding / Fast forwarding
1
Stop playback, press à or á.
The tape will stop automatically at the end of
rewinding or fast forwarding.
2
Press Ç to stop rewinding or fast forwarding.
Note:
– During rewinding or fast forwarding of a tape, it
is also possible to select another source (CD or
TUNER, for example).
pg 001-029/C355/21-Eng
Tape Operation / Recording
General information on
recording
If you do not intend to record via the
microphone, unplug the microphone to avoid
accidental mixing with other recording source.
For recording, use only tape of IEC type I
(normal tape).
The recording level is set automatically,
regardless of the position of the Volume, DBB,
DSC and so forth.
The tape is secured at both ends with leader
tape. At the beginning and end
of the tape, nothing will be
recorded for six to seven
) or "ONCE" ( )
seconds.
To prevent accidental recording,
break out the tab on the left
shoulder of the tape side you
want to protect.
If "CHECK TAPE" is displayed, the protection
tab has been broken. Put a piece of clear
adhesive tape over the opening.
IMPORTANT!
– Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
– Recording is possible only on tape deck 2.
21
3139 115 21381
12/24/01, 11:17 AM
21