Starting Up; Installing The Uim/Microsd Card And Battery - Zte D300 User Manual

Starting Up

Installing the UIM/microSD Card and Battery

Power off your phone before installing or replacing the battery, UIM card, and memory card.
1. Remove the battery cover.
2. Hold your microSD card with the cut corner oriented as shown in the following picture and then insert
it into the card holder properly.
3. Hold your UIM card with the cut corner oriented as shown below and then insert it into the card holder
properly.
4. Insert the battery by aligning the gold contacts on the battery with the gold contacts in the battery
compartment on the phone. Push down the battery until it clicks into place.
8 Confidential and Proprietary Information of ZTE CORPORATION
D300 User Manual