Changing Atf Fluid - Porsche Boxster 1999 Technical Manual

Maintenance
Boxster
Note
The filler hook must be
one of the openings of
on the filler hole. When
the filler hook upwards,
(4) can spring off upwa
Note
Without ATF, the engine must not be started and
the vehicle must not be towed.
4. Replace the sealing ring for the ATF drain plug
(1) and tighten the screw with 40 Nm (29 ftlb.),
5. Unscrew the ATF filler screw (2) and fill up
with ATF until surplus ATF escapes at the hole
of the ATF filler screw.
6. Move the selector lever to the position "P"
and allow the engine to run at idling speed.
Changing ATF fluid
7. With the engine running, again top up with ATF
until surplus ATF escapes at the hole of the
ATF filler screw (2).
Filling capacity: approx. 9 I
Change quantity: approx. 3.5
ATF type: ESSO LT 71141
8. With the brake pedal pressed, change through
all selector lever positions, remaining in each
position for approx. 10 s.
Remove the transverse strut panel.
2. Position an oil collection trough under the
transmission.
9. Check the ATF level again and top up if
necessary.
3. Unscrew the drain plug and drain off ATF.
Note
All instructions and inspection conditions listed
under "Checking and topping up the ATF fluid"
must be observed.
&
2
1
2
236 -96
03 20 00 Maintenance
Printed in Germany, 1996
03 -22
986031
carefully inserted intothe
ATF thrower cap (4)
doing so, do not move
since the oil guard caprds.