Inserting And Removing A Cd; Selecting The Cd As Audio Source - Blaupunkt Hamburg MP68 Operating And Installation Instructions

Startup

Inserting and removing a CD

CAUTION!
Damaging the CD drive
Labelled or shaped CDs can damage the CD
drive.
ü
Do not insert any mini CDs (8 cm diame-
ter) or shape CDs damage.
ü
Insert only circular CDs with a 12-cm
diameter.
ü
Do not attach labels to CDs since the
label may detach during operation.
Note:
Label CDs only by using a marker since
it does not contain any caustic materials.
Permanent markers can damage CDs.
u
Press the button
The control panel opens.
u
If a CD is in the drive, press the
>
button .
The CD is ejected.
u
Remove the CD.
If you do not remove the CD, it is automati-
cally pulled in again after a few seconds.
u
Insert the CD with its printed side up-
permost into the CD drive
feel some resistance.
The CD is automatically drawn in.
u
Close the control panel.
The display briefl y shows "READING". Next,
the following appears:
18
01BA_HamburgMP68us_gb.indd 18 01BA_HamburgMP68us_gb.indd 18
1
.
?
until you
•
The audio CD display if an audio CD is
inserted.
•
The MP3 display if an MP3 or WMA CD
is inserted.
The CD starts playing.

Selecting the CD as audio source

You can select an inserted CD as audio
source:
u
Press the SRC button
until "CD" (for audio CD) or "MP3" (for
MP3 CD) appears on the display.
Note:
The CD mode can be selected only if a
readable CD is inserted.
To operate the audio CD display, please read
the chapter "CD mode (audio)".
To operate the MP3 display, please read the
chapter "CD/USB mode (MP3/WMA)".
8
repeatedly
14.03.2008 10:48:50 Uhr 14.03.2008 10:48:50 Uhr