Removing The Restraining Bolts; Raising The Leveling Feet - HP StorageWorks ESL E-Series Installation Manual

10.Remove the four 3/4-inch restraining bolts securing the library to the shipping pallet (see
Figure 10). One restraining bolt is located near each leveling foot on the library.
1 Bolts
Figure 10

Removing the restraining bolts

11.Raise the leveling feet securing the library to the pallet (see
1
1 Leveling feet in raised position
Figure 11

Raising the leveling feet

1
ESL E-Series Tape Library unpacking and installation guide
Figure 11).
23