Using The Scale; Weighing Mode - Detecto WeighRite W200 Series User Manual

USING THE SCALE

Weighing Mode

1. During the scale is OFF, when the user step
onto the scale, the scale turns on and go
into this mode.
2. The scale measures the weight and displays.
After a stable weight is obtained, the weight
reading flashes and then locked
(Fig.6 Weighing mode).
3. After the weight reading is locked, if the user
steps off and then on the scale, the scale measures the weight again.
4. The scale starts measuring the zero weight if the user steps off the scale.
Then, the scale turns off (Fig.5 taking zero).
Memory Recall Mode
1. During the scale is OFF, press [ON] key to go into this Memory Recall Mode.
2. User press [FORWARD] or [BACK] to select the user memory and the gender, age, height
and athlete/normal mode are shown on the LCD. Fig.7
Having selected the user memory, the user memory is recalled and the last body fat %, the body
water %, Calorie Predictor, and BMI are shown on the LCD (Fig.8). After the scale shows
0.0lb, the user may step onto the scale for measurement.
4
The weight is measured and locked
first before starting the body impedance
measurement.
fig 6
fig 7
fig 8