Outlines Of Service; Outline Of Oil, Fuel, Coolant - Komatsu PW130ES-6K Operation & Maintenance Manual

MAINTENANCE.

OUTLINES OF SERVICE

Use Komatsu genuine parts for replacement.
G
When changing or adding oil, do not use a different type of oil.
G
Unless otherwise specified, the oil and coolant used at the
G
time of shipment from the factory are as shown in the table
below.
Item
Engine oil pan
Swing machinery case
PTO gear case
Hydraulic tank
Fuel tank
Radiator
Axles, Hubs
Transmission

OUTLINE OF OIL, FUEL, COOLANT

OIL
Oil is used in the engine and work equipment under extreme
G
severe conditions (high temperature, high pressure), and it
deteriorates with use.
Always use oil that matches the grade and temperature for
use given in the Operation and Maintenance Manual. Even if
the oil is not dirty, always replace the oil after the specified
interval.
Oil corresponds to blood in the human body, so always be
G
careful when handling it to prevent any impurities (water,
metal particles, dirt, etc.) from getting in.
The majority of problems with machine are caused by the
entry of such impurities. Take particular care not to let any
impurities get in when storing or adding oil.
Never mix oils of different grades or brands.
G
Always add the specified amount of oil.
G
Having too much oil or too little oil are both causes of prob-
lems.
Kind of fluid
SAE 15W-40
API classification CE
SAE 30
API classification CD
SAE 10 W
PI classification CD
ASTM D975 No.2(However,
ASTM D975 No.1 is used for the
winter season (October to March)
Komatsu Super Coolant (AF-ACL)
41% added to water
SAE 80W-90 API GL4
(MULTI-OIL)
SAE 20W-30 API GL4
OUTLINES OF SERVICE
167