Optional Components; Hooking Up Optional Components - Sony CMT-GP6V Operating Instructions Manual

Optional Components

Hooking up optional components

To enhance your system, you can connect optional components. Refer to the operating instructions
provided with each component.
A MD IN jacks
Use audio cords (not supplied) to connect an
optional analog component (MD deck, etc.) to
these jacks. You can then listen to the sound
from the component.
B VIDEO OUT jack
Use the supplied video cable to connect the
video input of TV to this jack.
C SUB WOOFER jack
Connect an optional powered subwoofer with a
built-in amplifier to this jack.
GB
26
Optional analog component
From the audio
output jacks of an
optional analog
component
Subwoofer
TV
To the video
input of a TV
Listening to audio from a
connected component
1
Connect audio cords.
See "Hooking up optional components" on
page 26.
2
Press MD on the unit.
Start playing the connected component.
Recording audio from a
connected component
1
Connect audio cords.
2
Start recording manually.
See "Recording on a tape manually" on
page 18.