Acer TravelMate 7000 User Manual page 73

For the notebook to enter suspend-to-memory mode, any of the following
conditions should exist:
When Lid is Closed parameter is set to
The suspend-to-disk file is either absent or invalid
With the suspend-to-memory conditions satisfied, there are many ways to
enter suspend mode:
Closing the display
Pressing the suspend hot key
Sustained inactivity
Battery fail condition occurs without a powered AC adapter connected
Any suspend condition where suspend-to-disk fails
When the system enters suspend-to-memory mode, the power indicator ( )
flashes.
There are four ways to leave suspend-to-memory mode and return to
normal mode:
If the display is closed, open the display
If the display is open, press any key.
The Resume on Modem Ring: parameter is set to
the internal modem rings.
The Resume on Schedule parameter is set to
Resume Date and Time parameters have been met.
3-14
Suspend-to-Memory Mode Conditions
Entering Suspend-to-Memory Mode
Leaving Suspend-to-Memory Mode
[Suspend To Memory]
- | (
)
[Enabled]
and
[Enabled]
and the
User's Manual