Table of Contents
Advertisement
Q: I made some changes in Setup but they don't seem to take effect.
A:
If you made any changes in Setup, these will only take effect the next
time the system restarts. Here a few ways to restart your notebook:
Q: Nothing appears on the screen.
A:
The notebook's power management system automatically blanks the
screen to save power. Just press any key to turn the display back on.
If pressing a key does not turn the display back on, two things might be
the cause:
Q: The keyboard does not respond.
A:
Try attaching an external keyboard to the PS/2 connector on the
notebook's rear.
service center as the internal keyboard cable may be loose.
8-4
In Windows 95, click on the Start button and select Shutdown....
Then select the Restart option.
In POST, execute a warm boot (pressing b - a - c ).
In POST, close the display and open the display.
Use the reset notch. See Q&A #2.
The contrast and/or brightness level might be too low.
-
- w (
) to increase the brightness level; press
to increase the contrast level.
The display device might be set to an external monitor. Press
- p (
) to toggle the display back to the notebook.
If it works, contact your dealer or an authorized
Press
-
- x ( )
User's Manual
Advertisement
Table of Contents
Troubleshooting
