Table of Contents
Advertisement
• Main Memory test...
Tests the main memory. The Main Memory test contains the following three test menus. Select the desired menu that suits
your need. The test is exited automatically when the respective test items end normally.
• Fast:
Tests once. (Taking one and half minutes to two minutes)
• Medium: Test ten times.
• Heavy:
Test twenty times.
Press the "Esc" key to abort the test.
• Main System test...
Tests the fundamental functions of the CPU, etc. The test is exited automatically when all test items end normally.
• FAN test...
Tests the fan. Tests whether the fan rotates and stops. Listen to the rotating sound or feel the wind of the fan to judge
whether the fan rotates and stops. The test procedure appears on display. Perform the FAN test following the messages on
display. Press "Y" to resume rotation when the fan comes to stop. Press "Y" when the fan starts rotating indicating that the
test ends in success.
• Touch pad test...
Tests the touch pad. Tests whether the cursor moves, and whether right-clicking and left-clicking function properly.
The dialog box appears three times. Move the cursor to the box that appears. The tests are performed in the following
order.
(1) Touch pad
(2) Right-click button
(3) Left-click button
• Serial loopback test...
The computer cannot perform this test.
• Parallel loopback test...
The computer cannot perform this test.
• Video test...
NOTE: Start this test after confirming the normal video picture on display.
Tests the video signal. Several video patterns appear every time the key is pressed. The person conducting the test must
visually check whether the patterns appear properly. Press Y when there is no abnormality.
• PPK test...
The computer cannot perform this test.
• GUID test...
This test is not required normally. Displays the GUID (I-link ID value), and judges whether the value on the display is
appropriate.
2-3
Confidential
PCG-SR9G/SR9G/T (I)
Advertisement
Table of Contents
