AT&T CL83107 Complete User's Manual page 63

Multiple handset use
Push-to-talk (PTT)
Using the telephone base:
1. There are a few ways to begin a PTT call to a single
handset. When the telephone base is not in use:
If you have one handset, press and hold PTT.
If you have more than one handset:
Press PTT, then use the dialing keys to enter the
destination handset number.
-OR-
Press
handset number, then press
The telephone base shows Connecting to HANDSET X...
(HANDSET represents the handset name, X represents
the destination handset number) for a few seconds. When the connection is
made, both the telephone base and destination handset display
Press and hold [PTT] to talk.
2. Press and hold PTT. A chirp indicates your microphone
is on. Speak towards the telephone base. Your voice is
broadcast to the destination handset.
While you are speaking, the telephone base shows
PTT To handset: X.
3. Release PTT after speaking. Both devices beep once again and the screens
show Press and hold [PTT] to talk, then you can press and hold PTT to
continue speaking or the destination device can respond (see Answer a
PTT call on page 63).
4. To end the PTT call, press CANCEL. The telephone base shows
Push to talk Ended for a few seconds.
or to highlight the destination
CID DIR
/SELECT or PTT.
MENU
57
PUSH TO TALK
>HANDSET X
Connecting to
HANDSET X...
Press and hold
[PTT] to talk
PTT To
handset: X