Notes When Applying An Electtric Starter; About The Engine - O.S. engine MAX-75AX-BE Instruction Manual

NOTES WHEN APPLYING
AN ELECTRIC STARTER
Do not over-prime. This could
cause a hydraulic lock and damage
the engine on application of the
electric starter.
If over-primed, remove glowplug,
close needle-valve
starter to pump out surplus fuel.
Cover the head with a rag to
prevent pumped out fuel from
getting into your eyes.
The 75AX-BE has been developed and
MAX-
designed to use O.S. Bio-Ethanol fuel only.
Therefore, some parts are different from
those of the 75AX that use conventional
MAX-
methanol based glow fuel. Also, special
attention is required in it's handling.
This engine has been developed based on the
MAX-75AX, to use only O.S. Bio-Ethanol fuel.
It develops enough power to fly general 61 size
sport models.
It is suggested to use propellers which develop
maximum r.p.m. of 8,500~9,500 so that you
may enjoy pleasant exhaust sound keeping it
low.
Glow plug, cylinder head, carburetor, drive hub
and silencer are different from those of the
MAX-75AX.
and apply
8
Needle Valve Extension Cable Set
9

ABOUT THE ENGINE

STANDARD ACCESSORIES
Glow Plug BE-3
(suppplied with the engine)
E-4040 Silencer Assembly
Silencer Retaining Screw (M4x40 2pcs.)