MAINTAINING YOUR VEHICLE
FLUID CAPACITIES
Systems
Power Electronics Cooling System
Battery Thermal Management Cooling System
Single-Speed Transmission
FLUIDS, LUBES, AND GENUINE PARTS
Component
Coolant
Brake Master Cylinder
Refrigerant
Compressor Lubricant
Single-Speed Transmission
•
Mixing of coolant (antifreeze) other than specified Organic Additive Technology
(OAT) coolant (antifreeze), may result in cooling system damage and may decrease
corrosion protection. Organic Additive Technology (OAT) coolant is different and
should not be mixed with Hybrid Organic Additive Technology (HOAT) coolant
(antifreeze). If a non-OAT coolant (antifreeze) is introduced into the cooling sys-
tem in an emergency, it should be replaced with the specified coolant (antifreeze)
as soon as possible.
•
Do not use water alone or alcohol-based coolant (antifreeze) products. Do not
use additional rust inhibitors or antirust products, as they may not be compatible
with the radiator coolant and may plug the radiator.
•
This vehicle has not been designed for use with propylene glycol-based coolant
(antifreeze). Use of propylene glycol-based coolant (antifreeze) is not recom-
mended.
126
Fluid, Lubricant, or Genuine Part
Mopar Antifreeze/Coolant 10 Year/150,000 Mile Formula
OAT (Organic Additive Technology) or equivalent meeting
the requirements of FCA Material Standard MS.90032.
Mopar DOT 3, SAE J1703 should be used. If DOT 3, SAE
J1703 brake fluid is not available, then DOT 4 is accept-
able. Use only recommended brake fluids or equivalent.
Mopar R134a
Mopar POE Oil or Equivalent meeting the requirements
of FCA Material Standard MS-12727
Castrol BOT 533
CAUTION!
U.S.
Metric
3.6 Quarts
3.5 Liters
7.0 Quarts
6.7 Liters
0.8 Quart
750 ml