Care & Cleaning - Bunn HB Owner's Manual

10 cup programmable coffee maker
Hide thumbs Also See for HB:
Table of Contents

Advertisement

Available languages

Available languages

CARE & CLEANING
Wash the brew funnel and glass carafe after each use – both are top rack
dishwasher safe.
Occasionally wipe the outside of your coffeemaker, including the area above the
funnel, with a mild, non-citrus detergent and a damp cloth. While cleaning your
coffeemaker, check the glass carafe handle and tighten with a phillips screwdriver
if it's loose.
This unique brewing system is sensitive to mineral build-up from the water
you use. Therefore, it is very important
to clean the internal system at least
every 3 months or whenever the digital
displays shows
"CLEAN" after a brew cycle is done. The
higher the mineral content in the water you use, the more often you should
clean. Regular internal system cleaning will prolong the life of your coffeemaker
and help guarantee an optimal brew result.
bunn accessories
BUNN offers a complete line of accessories including paper filters, glass carafes,
thermal carafes, replacement funnels, and more.
Visit www.bunn.com to order parts and accessories, or call the BUNN Home
Products Team at 1-800-352-2866.
1. Remove the Sprayhead located
above the Brew Funnel by turning
with your fingertips.
2. Check the Sprayhead. If plugged
with
mineral deposits or white flakes,
use a
toothpick to remove. Clean the
Sprayhead with a cloth and mild
detergent. Rinse the Sprayhead
with water.
3. Slide empty Brew Funnel into the
Funnel Guides under the Spray-
head.
4. Open the Flip Lid on top of the
coffeemaker and fill coffeemaker
with equal parts of water and white
vinegar solution (25 oz each).
Note: For a stronger clean, 100% white vinegar (50oz) can be used. Press the
Brew button and let the machine heat for 4 minutes. Then press the Brew button
to pause the machine. Let the vinegar soak for 30 minutes. Press the Brew
button to restart the machine and finish brew cycle. Run 3 or more cycles with
full carafes of water to flush remaining vinegar from coffeemaker.
5. Close the Flip Lid.
6. Place empty Carafe on the base
Warmer Plate of coffeemaker.
7. Let solution set for a few minutes.
8. Press the Brew button to cycle the
vinegar solution through the cof-
feemaker.
9. Empty carafe at end of cycle.
10. Run 3 or more additional cycles
with full carafes of water to flush
remaining vinegar solution from the
coffeemaker.
11. Reinstall Sprayhead.
12. To reset the "CLEAN" indicator,
press and hold the "H" and "M"
buttons for 5 seconds.
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents