Specifications; Led Indicators; Sd Card Slot; Buttons - Axis P5635-E User Manual

AXIS P5635-E Mk II PTZ Dome Network Camera

Specifications

Specifications
To find the latest version of the product's datasheet, go to axis.com > [product] > Support & Documentation.

LED indicators

Status LED
Unlit
Green
Amber
Amber/Red

SD card slot

NOTICE NO NO TICE TICE
• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the
SD card. Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Unmount the SD card
from the product's webpage before removal.
This product supports SD/SDHC/SDXC cards (not included).
For SD card recommendations, see axis.com

Buttons

Control button
The control button is used for:
• Resetting the product to factory default settings. See How to reset to factory default settings on page 15.
• Connecting to an AXIS Video Hosting System service. To connect, press and hold the button for about 3 seconds until the
status LED flashes green.
Power button
Press and hold the power button to temporarily power the product when the dome cover is removed. The power button is also used
with the control button to reset the camera to factory default settings. See page 15.

Connectors

Network connector
RJ45 Ethernet connector with Power over Ethernet Plus (PoE+).
Indication
Connection and normal operation.
Shows steady green for 10 seconds for normal operation after startup completed.
Steady during startup. Flashes during firmware upgrade or reset to factory default.
Flashes amber/red if network connection is unavailable or lost.
18