Install Your Modem Router - NETGEAR C6250 Quick Start Manual

LED
5 GHz WiFi
Ethernet
WiFi On/Off button Pressing this button for three seconds turns the WiFi radios
WPS button

Install Your Modem Router

¾ To install your modem router:
1. Collect your cable account number, account phone number,
and login information (your email address or user name and
password).
2. Connect a coaxial cable.
Use a coaxial cable that is provided by your cable company to
connect the cable port on the modem router to a cable wall
outlet or a line splitter.
Note: For Xfinity cable Internet service, Comcast Xfinity recommends
connecting your modem router to a cable wall outlet.
Description
• Solid green. The 5 GHz radio is on.
• Blinking green. The 5 GHz radio is transmitting or
receiving data.
• Blinking amber. WPS (Wi-Fi Protected Setup) is active.
• Off. The 5 GHz radio is off.
• Solid green. A device is connected to an Ethernet port
and powered on. Each Ethernet port provides two port
LEDs on the back panel.
• Blinking green. An Ethernet port is transmitting or
receiving data.
• Off. No device is connected to an Ethernet port.
in the modem router on and off. If the 2.4 GHz WiFi and
5 GHz WiFi LEDs are lit, the WiFi radios are on. If these
LEDs are off, the WiFi radios are turned off and you cannot
use WiFi to connect to the modem router.
Pressing this button for three seconds activates WPS
(Wi-Fi Protected Setup) for two minutes to let you add a
WiFi device to the WiFi network without typing the WiFi
password. While WPS is active, the 2.4 GHz and 5 GHz
WiFi LEDs blink amber.
4