Bissell 2113N User Manual page 8

SmartSet Steam Control
1
Plug machine into a properly
grounded outlet and press the
power button to turn ON.
3
When the blinking light changes to
a solid light, select the desired steam
level based on your cleaning needs.
Push the LOW STEAM button once
for delicate floors or for light, everyday
cleaning. Push again to turn off.
NOTE: You must select the POWER button and wait until the READY light
is a solid color before selecting your steam level. Upon the first use of your
steam mop or first use after refilling the water tank, the pump may make
a "knocking" sound. This is normal and will diminish after a few seconds.
8
www.BISSELL.com
2
Once the machine is ON, the READY
light will begin blinking. The blinking light
indicates the machine is warming up.
4
Push HIGH STEAM button once for
cleaning durable floors or sticky
messes. Push again to turn off.