Bissell 2113N User Manual page 7

Using SpotBoost Brush
Step down on the pedal
1
located on the back of
the machine and lift up
to expose the SpotBoost
Brush located on the
bottom of the unit.
WARNING
Do not step on the back pedal to recline the unit. When removing the foot, make sure to
lift away from your body as the bottom of the brush will release steam. Excess effort on the
brush may be abrasive to some surfaces; test first.
Using Scent Discs Tray
1
To insert scent discs, pull
the tray located on top
of mop head out to open.
2
Using the SpotBoost Brush, move back
and forth to clean grout, crevices and
sticky messes.
2
Use whole disc for a
refreshing scent or cut disc
in half for a lighter scent.
3
Place scent disc into tray
and push tray in to close.
www.BISSELL.com
7