Advertisement
TIDE APP
1.1 Today's Tide
This function allows you to know the tide information of the
day.
You can browse the spots, between the beaches you uploaded
to the Deep X, by pressing (+)/(-) buttons. The local spot will
always be the first to be highlighted. Once the spot selected by
pressing on SET pusher, pressing the (+) or (-) button will scroll
through the next/previous tide info with a 30mins interval.
Both the Time displayed and the tide graph rendered will be
updated. Pressing SET will display in sequence tide info
banner, tide time, tide height, sunrise/sunset of selected spot.
1.2 Future Tide
This function allows you to know the tide information of a
specific date. You can browse the spot between the beaches
you uploaded to the Deep X by pressing (+)/(-) buttons.
The local spot will always be the first to be highlighted. Once
the spot selected by pressing the SET pusher, press (+)/(-)
button to scroll through the calendar. Select a date by pressing
SET and it will display in sequence tide info banner, tide time,
tide height, sunrise/sunset.
1.3 Spot Info
This function will give you the surf best or ideal
conditions for a selected spot: BEST TIDE RANGE, BEST
SWELL & WIND ORIENTATION AND KIND OF BOTTOM
(ocean floor).
1.4 Customise
There is a huge tide, sunrise/Sunset & spot info data Library
that features some of the most popular surf spots around the
world. If you cannot find your target beach from the list of tide
Library, you can customize the beach that acts as your target
beach. What you can do is:
to your target beach and look up the time difference on the 1st
High tide between these 2 beaches. You can easily find this
information published on the Internet
your Deep X.
able to customise your spot name by selecting SET NAME func-
tion: use (+), (-) & SET buttons to enter new spot name. Then,
go back to CUSTOMISE menu and go to SET SPOT to select the
closest beach to your target one. And finally now, you can input
the time difference between these two beaches in SET DATA
mode using (+), (-) & SET buttons.
You can erase a customised spot by using CLEAR function
19
Advertisement
