User Guide: PTP 600 Series
PTP 58600 radio system specifications
Table 4-49
Table 4-49 PTP 58600 RF specifications
Radio Technology
RF Band
Channel Selection
Dynamic Frequency Control
Channel size
Manual Power Control
Receiver Noise Figure
Antenna Type (Integrated)
Antenna Type (External)
Antenna Beamwidth
(Integrated)
Max Path Loss (5 MHz
Channel)
Duplex Scheme
phn-0896_009v003
Feb 2010
contains radio system specifications for the PTP 58600.
Specification
5.725-5.850 GHz
By dynamic frequency control and manual intervention
Automatic detection on start-up and continual adaptation
to
avoid interference.
Initial capture 10-15 sec. Out of service on interference
100 ms.
5, 10, 15 and 30 MHz
Maximum power can be controlled lower than the power
limits shown above in order to control interference to
other users of the band.
Typically 6 dB
Flat plate antenna; 23 dBi
Parabolic dish, maximum permitted gain: 37.7 dBi
Flat plate; maximum permitted gain: 28.0 dBi
8 degrees
166 dB
Symmetric fixed, asymmetric fixed or adaptive TDD
UNDER DEVELOPMENT
PTP 58600 reference information
4-77