Table of Contents
Advertisement
MicroDock
Quick Reference Guide
Safety Information - Read First
Use the Station only as specified in this guide. Read the
following Cautions before using the Station.
a Cautions
⇒
If the Station is damaged or something is
missing, contact BW Technologies
immediately.
⇒
We recommend that the Station be attached to
a venting system or that the Station be used in
a well-ventilated area.
⇒
Confirm that the inlet filter is clean.
⇒
Confirm that all gas bottles contain enough
gas.
⇒
A demand flow regulator must be used with all
gas bottle connections.
⇒
Calibrate and bump only in a clean
atmosphere that is free of background gas,
otherwise connect a zero air bottle to the zero
air inlet on the Station.
⇒
Don't expose the Station to electrical shock
and/or severe continuous mechanical shock.
⇒
The Station warranty will be void if the unit is
2
disassembled, adjusted, or serviced by non-
BW Technologies personnel.
⇒
Do not immerse the Station in liquids.
⇒
The vent line must not be connected to a
negative pressure system.
⇒
The maximum recommended vent line length
is 50 feet.
Advertisement
Table of Contents
