CITROËN C3 PICASSO 2012 Owner's Handbook Manual page 163

Refitting a wheel
After changing a wheel
To store the punctured wheel in the boot
correctly, first remove the central cover.
When using the "space-saver" type
spare wheel, do not exceed 50 mph
(80 km/h).
Have the tightening of the bolts and the
pressure of the spare wheel checked
by a CITROËN dealer or a qualified
workshop without delay.
Have the punctured wheel repaired and
replace it on the vehicle as soon as
possible.
Practical information
List of operations
Put the wheel in place on the hub.
Screw in the bolts by hand as far as
possible.
Pre-tighten the security bolt (if your vehicle
has them) using the wheelbrace 1 fitted
with the security socket 4 .
Pre-tighten the other bolts using the
wheelbrace 1 only.
11
161