Download Print this page

Setting The Clock - HoMedics ENVIRASCAPE SS-400B Instruction Manual And Warranty Information

Sound spa

Advertisement

refreshed the next morning. Sound Spa Clock Radio's Woodlands sound features
a calming song of nature. The gentle flow of water in Mountain Stream soothes away
the day's worries so you'll wake feeling better rested and invigorated.
Natural sounds also work amazingly well to mask distractions and help us focus our
thoughts. Sound Spa Clock Radio's White Noise feature, produced from the sound of
a giant waterfall, provides continuous, relaxing sound that clears the mind of outside
noises to help you concentrate.
Six Natural Sounds
Mountain Stream
Woodlands
Ocean Waves
Refresh your
Journey into the
Get lost in the
senses next to a
deep woods under
rhythm of waves
gentle stream.
a canopy of
washing upon
calming sound.
the shore.
White Noise
Summer Night
Spring Rain
Mask distractions
A chorus of
Steady rainfall
beneath a giant
crickets perform
creates the perfect
waterfall.
nature's lullaby.
sleep environment.
4
To Use Sound Spa Clock Radio
Sound Spa Clock Radio operates on either the AC adapter included or by 3 AA batter-
ies (not included) and 2 AAA (included). The 2 AAA batteries will also act as back up
of the clock setting in case of a power outage.
TO USE CLOCK RADIO WITH AC ADAPTOR: Insert the plug into an electrical
outlet and connect the receptacle end to the side of the unit. The clock radio will be
fully functional. For battery back-up in the case of a power outage, you can insert 2
AAA batteries into the right side of the battery comportment. Without these batteries
for back-up, the clock settings will be lost in the case of a power outage and will need
to be re-set.
TO USE CLOCK RADIO WITH BATTERIES: Insert 3 AA batteries (for radio and
sounds) into the left side of the battery compartment and 2 AAA batteries (for clock)
FIGURE A
into the right side of the battery compartment, following the diagrams on the inside.
A
Note: adaptor should not be connected if using batteries.

SETTING THE CLOCK

1. Press the TIME SET button located on the front of the unit (Figure A).
2. While pressing the TIME SET button, press the HOUR button until you reach
the correct hour.
3. Continue to hold down the TIME SET button and press the MIN (minute)
button until reaching the correct time.
Note: AM will appear on the clock face during the AM hours. Be sure to set the
time for the correct 12-hour period – AM (morning) or PM (evening).
LISTENING TO SOUNDS
1. Press the SOUND button on the front of the unit to select the desired sound.
2. Press the ON/OFF button located on the front of the machine. The LED light will
illuminate when the unit is on.
5

Advertisement

loading

This manual is also suitable for:

Envirascape sound spaSs-400b