Cisco 12012 Replacement Instructions Manual page 10

Removing and Replacing a DC-Input Power Supply
Step 5
Figure 5
DC-input
power
supply
Caution
power supply.
Step 6
10 Cisco 12012 Gigabit Switch Router DC-Input Power Supply Replacement Instructions
Grasp the power supply handle and slide the power supply halfway out of the bay. (Refer
to Figure 5.)
Removing a DC-Input Power Supply
Use two hands to slide power supply out of bay
The DC-input power supply weighs 19 lb (8.3 kg). Use two hands when handling the
Place your free hand underneath the power supply for support and slide the power supply
completely out of the bay. Place the power supply face up on the floor in front of you.