Table of Contents
Advertisement
36
REMOTE CONTROL FUNCTIONS
Voice recognition (Depending on model)
voice search function can support web
searching.
1 Press the Voice recognition button.
2 Speak when the voice display window
appears on the left of the TV screen.
The voice recognition may fail when
you speak too fast or too slow.
Use the Magic Remote no further than
10 cm from your face.
The recognition rate may vary
depending on the user's characteristics
(voice, pronunciation, intonation and
speed) and the environment (noise and
TV volume).
Registering the remote control
The Remote Control operates by pairing with
your TV. When turning the TV on for the first
time, please pair the remote to the TV.
How to register the remote control
Press the
the remote control.
How to deregister the Magic Remote
Press the
buttons at the same time, for five
seconds, to unpair the QWERTY
Remote with your TV.
How to re-register the remote control after
registration failure
Reset the remote control by
pressing and holding the
button for 3 seconds. (Once the
reset is complete, the light on the
Pointer blinks.) Then repeat the
above procedure to register the
remote control.
How to use remote control
Shake the Magic Remote slightly to the right
and left or press
the pointer appear on the screen.
If the pointer has not been used for a certain
period of time or Magic Remote is placed on
a flat surface, then the pointer will disappear.
Precautions to take when using
the remote control
Use the remote control within the maximum
communication distance (10 m). Using the
remote control beyond this distance, or
with an object obstructing it, may cause a
communication failure.
A communication failure may occur due to
nearby devices. Electrical devices such as
a microwave oven or wireless LAN product
may cause interference, as these use the
same bandwidth (2.4 GHz) as the Remote
Control.
The Remote Control may be damaged or
may malfunction if it is dropped or receives a
heavy impact.
Manufacturer and installer cannot provide
service related to human safety as the
button to pair
applicable wireless device has possibility of
electric wave interference.
It is recommended that an Access Point (AP)
be located more than 1 m away from the
TV. If the AP is installed closer than 1 m, the
remote control may not perform as expected
and
due to frequency interference.
The TV only supports the included LG
QWERTY remote control. It may be
compatible with a keyboard that meets HID
The cursor automatically stays still when the
QWERTY keyboard is facing up in order to
prevent any wobbling cursor.
Magic remote and QWERTY remote can
not be used at the same time. If you want to
change the remote control, please re-register
the new remote control.
,
buttons to make
Advertisement
Table of Contents
