Switching Input Signals; Downloading Software; Setting Up The Internet Connection - BenQ RP654K User Manual

26 Basic operations

Switching input signals

To select an input signal do either one of the following:
• Press the INPUT button on the remote control.
• Press the Menu button on the front panel.
• Drag the General Setting menu up from the bottom-center of the screen.
The users can enable the Eye Care and PIR Sensor (Motion Sensor) function on the OSD
menu.
Eye Care solutions
Blue light with wavelengths under 455 nm could affect vision and age the eyes. Eye Care
solution is designed for eyesight protection: the display provides proprietary eye-care
technology with zero-flicker performance and ultra-low blue light emission, preventing
eyestrain, eye fatigue and macular degeneration caused by extended sessions in front of a
display. In addition, advanced anti-glare screen treatment minimizes distracting reflections
and glare for optimal productivity and comfort.
Suggestions for long-term use of the display:
• Rest your eyes for 10 minutes after 30 minutes of continuous use.
• For every 20 minutes of display viewing, look into the distance for 20 seconds.
• When your eyes get sore and strained, close your eyes for a minute and then roll your eyes in
all directions.

Downloading software

BenQ may periodically release software updates that may add functions or applications
associated with your display. To check if there is a software update available for your
device or to obtain the software license key, please visit http://DSdownload.BenQ.com.
Then enter the serial number (can be found on the sticker attached on the back of the
display) and click OK to access the Software download page.

Setting up the Internet connection

Your display must be connected to a network to conduct OTA updates or surf the
Internet.
To find the MAC address in Android OS, please go to Setting > Network > Status.