Table of Contents
Advertisement
Chapter 11
Done!
Note:
1. The product supports a maximum of ten simultaneous connections.
2. If one of the site has been offline for a while, for example, if Site A has been disconnected, on Site B you need to click
Disable
and then click
Enable
11 8
Set Up the IPv6 Tunnel
The IPv6 Tunnel feature helps you obtain IPv6 resources based on an IPv4 WAN
connection or vice versa.
IPv6 Tunnel is a transition mechanism that enables IPv6-only hosts to reach IPv4
services or vice versa and allows isolated IPv6 hosts and networks to reach each other
over IPv4-only infrastructure before IPv6 completely supplants IPv4. It is a temporary
solution for networks that do not support native dual-stack, where both IPv6 and IPv4
run independently.
The modem router provides three tunneling mechanisms: 6to4,
way to set up 6rd and DS-Lite tunnel are similar.
11 8 1
Use the Public IPv6 Tunnel Service-6to4
The 6to4 tunnel is a kind of public service. If there is any 6to4 server in your network,
you can use this mechanism to access IPv6 service. If your ISP provides you with an
IPv4-only connection but you want to visit IPv6 websites, you can try to set up a 6to4
tunnel.
I want to:
How can I
do that?
Now IPSec VPN is implemented to establish a connection.
after Site A back on line in order to re-establish the IPSec tunnel.
Set up the IPv6 tunnel though my ISP doesn't provide me with
the tunnel service.
1 Visit http://tplinkmodem.net, and log in with the password
you set for the modem router.
2 Go to
Advanced
>
3 Tick the check box, select
and select a WAN connection from the drop-down list, then
click Save.
Specify Your Network Settings
6rd
Network
>
IPv6
Tunnel.
6to4
as the tunneling mechanism
and DS-Lite. The
61
Hide quick links:
Advertisement
Table of Contents
